Gathering In The Grain
The grain is ripe, gleaming gold in the sunlight. Paddocks ripple when a breeze rustles through the tall stems. We’ve been so thankful for our wet fortnight but now we pray the rain will stop. We need dry, windy weather to harvest the grain. Anticipation has been building for days. The combine harvester has been checked and cleaned and the transport truck is on standby. Once the moisture content of the barley kernels drops we’ll be good to go.
A Vital Crop.
Undoubtedly the most important crop to harvest on the farm is the grain. The barley and oats are vital winter feed for our animals.
In the winter it’s too cold for the grass to grow so we feed the sheep grain, hay and baleage (individually wrapped bales of fermented grass). Every spring we sow many acres of seed, and each autumn we harvest the grain to fill our silos and sell to local farmers.
Garston doesn’t have endless crop-filled plains like the US or Australia. In those countries, huge combines chug along day and night in a straight line, their drivers almost on autopilot. But our paddocks are small, bounded by wire fences and filled with bumps and hollows. The driver must be alert at all times. He has to watch out for dips or rises in the ground, not to mention the occasional rock. He must always keep the combine even and has to constantly make small adjustments. One of my many brothers-in-law is the driver. He likes to begin harvesting on the outside of the paddock and moves in ever-decreasing circuits until the last one is done in the middle.
Will the Combine Last the Distance?
Finally a nor’wester springs to life. In Garston, this is a hot, dry wind. During the summer drought, it sucked every bit of moisture out of the ground and we shook our fists at it; but now we’re smiling, because it will dry out the grain. (We can’t harvest wet grain because it will spoil in the silos.) So now we have but one, fervent wish: that the old combine will not break down.
Twenty years ago, she was a sparkling, brand new Massey Ferguson Harvester. Not the biggest, but perfect for our needs. I still remember the day she drove up, gleaming red and ready for action. Lenny, the proud salesman, followed hard on her heels; delighted to show her off and bask in our excitement. His Scottish accent broadened till we could hardly understand him, as he explained all her wonderful features. We christened her with cups of coffee and cake. Then she rumbled into the paddock and our first-ever trouble-free harvest began.
The MF replaced an ancient harvester which constantly broke down every season. No wonder we were so delighted with our new machine. In her first few years, harvesting happened without a hitch. But those days are long gone. Now the old girl is showing her age — as are the farmers. But we can’t afford to replace her, so we start the season, once again, with our fingers crossed.
What Exactly is a Combine Harvester?
A combine harvester combines the actions of cutting, threshing and winnowing the grain— which used to be done with separate implements — into one machine. It’s a complicated beast: full of cutters, wheels, cogs, chains and belts. There’s lots of potential for things to go wrong.
The front has a long blade which cuts the stalks close to the ground. A reel goes round and brings the grain-filled stalks to an augur which then drags it up into the machine. An auger is a metal tube with a giant screw inside. The screw turns and the spirals take the grain up the auger.
Inside it goes into a drum which knocks the grain kernels out. They fall through sieves, and onto an elevator which drops them into a big tank.
The straw, dust, and chaff (husks and smaller grains) then pass over a series of riddles which catch any further grain and send it to the elevator. The rest is blown out the back, to lie in neat rows. It’s a noisy, complicated, fascinating process.
Harvesting Begins.
So off we go on the harvest treadmill. Round goes the combine with the transporter truck waiting patiently in a corner of the paddock. When the combine’s tank is full of grain, an orange signal light begins to blink and the truck driver knows to drive alongside. A small auger winds out from the side and all the grain is pumped out into the truck’s enormous bin. This will happen over and over again until the bin is full. Then the truck will head to the silo where it will tip the grain into another auger, which will take it to a hole in the top of the silo. Down it pours, into the dark depths, and the truck trundles back to the paddock ready to receive the next load.
A few rows behind the combine, my nephew is driving his tractor and baler. He’s gathering the straw into big, round bales, which he will sell to a local dairy farmer who winters his cows inside big barns. The straw will make excellent bedding for the cows.
Round And Round We Go.
This cycle goes on and on, broken every now and then by my arrival with a meal. Morning tea, lunch, afternoon tea, dinner… even supper if the wind is still blowing and they are harvesting after dark. It’s a much-needed break for the drivers and they stretch their legs gratefully as they chat over coffee and food. But all too soon it’s back to the machines and the harvest grinds on.
And the combine breaks down. Again! This time it’s a tiny, innocuous button on the joystick that raises and lowers the front. Oh, so small — it’s been under the driver’s thumb every harvest toggling east, west, north, south, making small adjustments. I didn’t even know it existed until it broke, but apparently, it’s essential. And it’s difficult to replace — not to mention expensive!
Farmers are resourceful people — the men repair the button with Blu Tack and Superglue, and carry on. The repair lasts for a few hours, but that blasted button continues to break down. They call in the local engineer… the mechanic… the whizz-kid from down the road… each one makes a temporary repair — and the grain harvest continues until…
Finally Finished.
The last grain topples into the silo. The engines switch off and peace descends over the farm. Harvest is done for another year. We’d celebrate — if we weren’t all so exhausted. The combine drives back into her shed. Now we’ve got a year to source and repair that pesky button before we start the process all over again next autumn.
Did you enjoy reading about the grain harvest? If so, you’ll probably like the other posts in this series:
I’d love to know what you think. Do you have experience of harvest time on a farm? Maybe you’re from the city and interested in other ways of life?
Let me know in the comments below.
